Find Your Dream Radiology Job in India

Job Title:

QC Testing Engineer - Radiology & Imaging Systems (X-Ray / C-Arm / DR / CT)

Department:

Quality Control / Quality Assurance - Radiology Division

Location:

Vapi, Gujarat

Reports To:

QC Supervisor / Manager - Radiology Systems

Job Purpose:

To perform quality control testing, inspection, and validation of radiology and imaging systems including X-Ray, C-Arm, Digital Radiography (DR), and CT Scan equipment, ensuring compliance with BIS, ISO, and IEC standards and maintaining the highest levels of safety, accuracy, and reliability.

Key Responsibilities:

1. Product Testing and Inspection

• Conduct electrical, mechanical, radiation, and functional testing of X-Ray, C-Arm, DR, and CT systems as per approved test procedures and standards as per BIS & IEC.
• Verify system performance parameters including electrical safety, mechanical stability, Mechanical Stability and operational accuracy.
• Carry out final acceptance testing before equipment release.
• Ensure complete adherence to BIS 13450, ISO 13485, and IEC 60601 series standards for medical electrical and imaging equipment.

2. Quality Compliance and Documentation

• Maintain detailed and accurate testing records, calibration data, and inspection reports in line with internal and external audit requirements.
• Ensure strict compliance with Good Manufacturing Practices (GMP) and quality management documentation.
• Identify non-conformities, assist in root cause analysis, and implement Corrective and Preventive Actions (CAPA).
• Collaborate with R&D, Production, and QA teams to continuously improve product quality and testing efficiency.

3. Equipment Calibration and Maintenance

• Ensure all testing and measuring instruments are calibrated, certified, and properly maintained.
• Perform or support calibration of HV Tester, NLC Tester, electrical safety analyzers, and mechanical gauges.
• Monitor and maintain environmental, radiation, and electrical safety standards during testing operations.

4. Standards and Regulatory Alignment

• Execute testing as per BIS, ISO 13485, IEC 60601, and related medical imaging equipment standards.
• Stay updated with new and revised standards for diagnostic imaging systems including DR, X-Ray, and CT equipment.
• Participate in internal and external audits by certification and regulatory authorities.

Qualifications and Experience:

• B.E. / B.Tech / Diploma in Electronics, Biomedical.
• 3-5 years (or more) of experience in Quality Control, Testing, or Validation of radiology or medical imaging equipment.
• Hands-on experience in testing X-Ray generators, DR detectors, high-voltage assemblies, and imaging control systems.
• Strong knowledge of BIS, ISO 13485, GMP, and IEC 60601 compliance requirements for medical devices.

Skills and Competencies:

• Proficiency in using electrical safety analyzers as HV tester, earth tester, NLC tester, and calibration tools.
• Strong analytical and diagnostic skills with attention to detail.
• Excellent documentation, observation, and reporting capabilities.
• Familiarity with high-voltage systems, Earth testing, digital imaging detectors, and DICOM standards preferred.
• Good communication, teamwork, and cross-functional coordination skills.
• Commitment to quality, safety, and continuous improvement.

Key Performance Indicators (KPIs):

• Accuracy and completeness of test reports
• Compliance with BIS / ISO / IEC standards
• Reduction in product rejections and field complaints
• Timely completion of testing activities
• Successful audit outcomes and documentation readiness

Job Title:

Production Engineer – Equipment Assembly (Radiology & Imaging Systems)

Department:

Production / Manufacturing – Radiology Division

Location:

Vapi, Gujarat

Reports To:

Production Supervisor / Production Manager – Radiology Systems

Job Purpose:

To perform and supervise cable connections, fitting, and assembly operations for high-precision radiology and imaging systems such as X-Ray, C-Arm, CT scan, DR system units , ensuring that all production activities meet stringent quality, safety, and performance standards.

Key Responsibilities:

1. Assembly and Wiring Operations

• Execute electrical wiring, cable routing, crimping, and harness assembly for radiology and imaging equipment.
• Perform mechanical fitting and sub-assembly of modules including X-ray tubes, detectors, high-voltage generators, and gantry systems.
• Ensure accurate integration of electrical, electronic, and mechanical components as per engineering drawings and assembly instructions.
• Conduct preliminary alignment and connection checks prior to system integration and testing.

2. Quality and Compliance

• Adhere strictly to SOPs, assembly checklists, and work instructions throughout the production process.
• Perform in

Job Title:

R&D Design Engineer – Radiology & Imaging Systems

Department:

R&D Design – Radiology Division

Location:

Vapi, Gujarat

Reports To:

Manager / Senior Manager – R&D Design

Job Purpose:

To drive product design, innovation, and continuous improvement for radiology and imaging systems such as X-Ray, C-Arm, Digital Radiography (DR), CT systems, and related accessories , ensuring superior quality, safety, and performance aligned with global standards.

Key Responsibilities:

1. Product Design & Development

• Design and develop new radiology and imaging system components and assemblies including X-Ray, C-Arm, DR, and CT systems.
• Work on mechanical, electrical, and electronic system design — ensuring functional reliability, ergonomics, and manufacturability.
• Develop detailed CAD models, circuit schematics, and design documentation as per internal and regulatory requirements.
• Collaborate with cross-functional teams to convert design concepts into production-ready solutions.

2. Product Improvement & Quality Enhancement

• Analyse field and production feedback to drive design improvements for enhanced product quality, stability, and serviceability.
• Imple

Job Title:

QC Testing Engineer – Radiology & Imaging Systems (X-Ray / C-Arm / DR / CT)

Department:

Quality Control / Quality Assurance – Radiology Division

Location:

Vapi, Gujarat

Reports To:

QC Supervisor / Manager – Radiology Systems

Job Purpose:

To perform quality control testing, inspection, and validation of radiology and imaging systems including X-Ray, C-Arm, Digital Radiography (DR), and CT Scan equipment , ensuring compliance with BIS, ISO, and IEC standards and maintaining the highest levels of safety, accuracy, and reliability.

Key Responsibilities:

1. Product Testing and Inspection

• Conduct electrical, mechanical, radiation, and functional testing of X-Ray, C-Arm, DR, and CT systems as per approved test procedures and standards as per BIS & IEC.
• Verify system performance parameters including electrical safety, mechanical stability, Mechanical Stability and operational accuracy.
• Carry out final acceptance testing before equipment release.
• Ensure complete adherence to BIS 13450 , ISO 13485 , and IEC 60601 series standards for medical electrical and imaging equipment.

2. Quality Compliance and Documentation

• Maintain detailed and accurate testing records

Job Title:

Service Engineer – Service & Maintenance (Radiology & Imaging Systems)

Department:

Service & Maintenance – Radiology Division

Location:

Vapi, Gujarat / Field-based (Pan India)

Reports To:

Manager / Senior Manager – Service & Maintenance

Job Purpose:

To ensure installation, maintenance & repair, and efficient operation of radiology and imaging systems including X-Ray, C-Arm, Digital Radiography (DR), and CT equipment , through effective service execution, preventive maintenance, and customer support.

Key Responsibilities:

1. Installation, Service & Maintenance

• Perform installation, calibration, and validation of X-Ray/ C-Arm/ DR, and CT systems at customer sites & repair in factory production.
• Execute preventive and corrective maintenance schedules to ensure high system uptime and reliability.
• Diagnose and repair hardware, electrical, and mechanical and software issues in imaging equipment and associated utilities.
• Ensure that all service activities comply with manufacturer guidelines, AERB regulations , and internal quality standards.

2. Customer Support & Troubleshooting

• Provide prompt and effective on-site technical support for service calls,

Job Title:

RA & QA Engineer – Regulatory & Safety (Radiology & Imaging Systems)

Department:

Regulatory & Safety – Radiology Division

Location:

Vapi, Gujarat

Reports To:

Manager / Senior Manager.

Job Purpose:

To manage and coordinate regulatory documentation and compliance activities for radiology and imaging systems such as X-Ray, C-Arm, Digital Radiography (DR), and CT equipment , ensuring adherence to BIS, AERB, NABL , and international regulatory standards applicable to medical device manufacturing.

Key Responsibilities:

1. Regulatory Documentation and Compliance

• Prepare, review, and maintain documentation for product approvals and certifications from BIS (Bureau of Indian Standards), AERB (Atomic Energy Regulatory Board), and NABL (National Accreditation Board for Testing and Calibration Laboratories).
• Ensure all technical files, QA test reports , and compliance certificates are updated and aligned with current regulatory norms.
• Coordinate the submission and follow-up of applications for new product registrations, renewals, and amendments.
• Track changes in regulatory requirements and ensure timely updates to internal documentation and procedures.

2. Product and Process Compliance

• Ensur

Job Title:

Production Assembly Supervisor – Radiology / X-Ray / CT Scan Equipment

Department:

Manufacturing / Production (Medical Imaging Devices)

Location:

Vapi, Gujarat

Reports To:

Production Manager – Radiology Systems.

Job Purpose:

To supervise and coordinate the assembly, integration, and testing activities of radiology imaging systems (X-Ray, C-Arm, CT scan & DR System), ensuring production efficiency, adherence to quality standards, and timely delivery of high-precision medical equipment.

Key Responsibilities:

1. Production & Assembly Management

• Supervise daily assembly operations of radiology and imaging systems including X-Ray, C-Arm, CT equipment & DR.
• Ensure adherence to standard operating procedures (SOPs), work instructions, and assembly checklists.
• Coordinate with planning, procurement, and stores for material availability and production scheduling.
• Monitor production targets, yield rates, and efficiency KPIs.

2. Quality & Compliance

• Ensure strict compliance with ISO 13485, GMP, and other regulatory requirements.
• Implement in-process quality checks and final inspection protocols.
• Collaborate with Quality Assurance for defect analysis, CAPA (Corrective and Preventive Actions), an